Non-Sparking Tool Set(Aluminum Bronze)
Fiildtekii Non -Sparking Tool Set Aluminum Bronze High Hardness Safety Tool Kit Suitable for Combustible Gas and Explosion Proof Area
Material: Two materials for option, Aluminum Brass Alloy and Beryllium Brass Alloy.
Components: adjustable Wrench, fixed Wrench, valve handle, pipe wrench, hammer, pliers, screwdriver, Knife, scissor, cutter, chisel, bar, pinch, tweezers, frame, saw blade, flashlight, brush, scraper, sockets are included in different tool sets.(8pcs to 62pcs per set)
Characteristic:Non sparking, High hardness, High Tensile Strength, Slight Magnetic.(please choose Beryllium Brass if non-magnetic required )
Wide Application: Hazadous environment, Fuel station, Electricity, Chemical Plant, Corroside liquid, Combustible vapors, Shipyards, Pharmaceutical, Food industry, Home daily maintenance.
As gifts to your elders and friends. Safety tools worth having, just a little expensive.
Fiildtekii Tools Set Selection Sheet
We provide 24 tools sets for your option, and two materials are freely available in each type.
How to Choose Aluminum Bronze OR Beryllium Bronze?
Aluminum Bronze Alloy Tools
Fiildtekii Brand, Product Model A19XX
No Sparking, Slightly Magnetic, 9%-10.5%Aluminum
Tensile Strength >75-85 kgf/mm2; Hardness: Not less than HRC25 (FIRM & HARD)
Usage Location : Home, Gas station, Most explosion-proof locations
Price: Cost-effective
Beryllium Bronze Alloy Tool
Fiildtekii Brand, Product Model B19XX
No Sparking, No Magnetic, Beryllium 2.7%-4.6%
Tensile Strength >>105-120kgf/mm2; Hardness: Not less than HRC35 (FIRMER & HARDER)
Usage Location : All Aluminum brone usage, areas prone to large leaks of explosive gases, and extreme location
Price: More expensive
Explosion-proof tools use and maintenance instructions
All kinds of tools should be cleared of surface oil and dirt before use.
After use, wipe off the surface dirt and accumulation of material, placed in a dry place to save, and corrosive substances separated from the storage.
Percussion tools continuous blow, each blow to remove the tool in time to strike parts of the adhesion, and then continue to use, more than ten times should be appropriate intermittent.
Wrench products can not be used in excess of the force, and can not be casing or binding of other metal bars to extend the force arm, as well as hammering (except for knocking wrenches)the method of knob fasteners with.
Edge tools should be placed in the water tank gently contact with the grinding wheel when sharpening, not too hard and contact with the grinding wheel for too long.
Knocking, smashing class tools in practice, must be clear of site debris and work surface corrosion of oxides, to prevent third party impact.
Wide Usage:
User' Manual
